More key & remote programing

Volvo key & remote programing

440/460

1. In the under bonnet diagnostic socket, connect fly lead to terminal 1 lock and unlock the vehicle using existing remote
2. Switch ignition on
3. Press test button on the diagnostic socket 4 times, LED illuminates
4. Press button 3 times, then 4 times and then 4 times again
5. Press the unlock button on the first remote
6. Repeat the programming procedure for additional remotes. 4 remotes maximum

850/940/960

1. Sit in the vehicle with all doors closed.
2. Turn the ignition key off and on four times (not to start position, but the on position) and on the fifth time leave in the on position.
3. Press the remote lock/unlock button several times (if there is a dashboard mounted LED come on for 2 seconds and then it should flash for 10 seconds) to synchronise the remote to the control unit. Repeat for
Additional remotes.
4. Switch off the ignition and test the remotes. 4 remotes maximum

850 (Alternative Method)

1. Sit in the vehicle with all doors closed.
2. Turn the ignition key off and on four times quickly (not to start position, but the on position) and on the fifth time leave in the on position.
3. Press the remote lock/unlock button several times (if there is a dashboard mounted LED it should flash for 2 seconds and then it should flash intermittently for ten seconds) at this time hold it on to synchronize the remote to the control unit until the LED goes out. Repeat for additional remotes.
4. Switch off the ignition and test the remotes. 4 remotes maximum
5. Suggest you do a couple of test runs first to save getting frustrated.

XC 90

1. Sit in the vehicle with all doors closed.
2. Turn the ignition key on and off five times (not to start position, but the on position) and on the fifth time leave in the on position.
3. Press the remote lock/unlock button several times (if there is a dashboard mounted LED it should light for 2 seconds and then it should flash for 10 seconds) to synchronise the remote to the control unit. Repeat this for additional remotes.
4. Switch off the ignition and test the remotes. A maximum of 4 remotes can be programmed.

XC90 (Alternative Method)

1. Close all the doors, the bonnet and the boot.
2. Switch the ignition on and off 5 times within 10 seconds, and leave the ignition on the fifth time.
3. Press one of the two buttons on each remote control.
Note: The first remote control has to be programmed within 15 seconds. The rest must be programmed a maximum of 10 seconds apart from each other.
4. Switch off the ignition and test the remote controls.
If you are unsure how to program your remote controls, please contact your Volvo dealer.